Z50 540MM Inverted Fork with Disc

Fits

Honda Z50 1972-79 with 4 Bolt x 65MM 10" rims

Z50R 1980-99 by re-drilling stock rim or with early style 4 Bolt x 65MM rim

Specifications

540MM from top of fork to axle

Uses a 4 X 65MM hub for minimum of 10" wheels

Please refer to photos and verify fitment before purchasing

100MM riser hole spacing

Features

• 6061 CNC Aluminum triple tree with races and ball bearings

• 45MM Oil filled shock and spring assemblies

• Original styling Z50 hub to match stock 10 inch rim with preinstalled bearings

• 220MM Drilled disc rotor, brake pads and hydraulic lever system

• Speedometer drive and cable

Made to be used with risers and BMX style handlebars. Original fold down bars can be mounted by modifying bar clamps or can be found on our website already provisioned for the top nut

NOTES

1. Loctite and tighten all bolts and nuts. They are not tight from factory, only loosely put together.

2. Try not to release pressure from the brake system. They are not easy to bleed the air out of them. There are tricks to make it easier, but it's best to just avoid depressurizing.

3. If you have any questions about installation please contact us. It's best to play with the spacing and see how everything goes together. If there are any issues or things that don't seem straight forward let us know.

4. This is a custom part, we cannot guarantee fenders will fit unmodified, other wheels will fit, original OEM risers will fit, tires will fit, etc.